Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

howto setup lan to lan ipsec

Could you please point me in the right direction to setup a pix501 to pix515 for ipsec.

And how to configure the workstation access at the 501 side,

I do not want that the workstation to access the 515

through the 501 AND the internet at the same time.

Thanks

1 REPLY
Cisco Employee

Re: howto setup lan to lan ipsec

This sample config should help you out:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

In your case the 501 would be PIX1 in the sample config, the 515 would be PIX2. Have fun.

129
Views
5
Helpful
1
Replies
CreatePlease to create content