Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

HUM polling problem

I've got a problem in HUM as I can't poll 5 devices. When I want to configure polling instances on those 5 switches (3500XL, 3550 and 3560 in snmp v2 and v3), there is nothing to poll.

snmpwalk is working fine and all other module are working fine on those devices.

It is doing that since I've restored LMS on my new server.

I'm using LM 3.1 with averything up to date.

I've got those errors in the upm_process.log

============================

Aug 25 15:16:01 EDT 2008 ],ERROR,[Thread-18],com.cisco.nm.upm.dal.DeviceAccess,initCredentials,130,SNMP credenttilas are not available with device manager.

Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool149],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.22

[ Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool157],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.25

[ Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool152],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.29

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool149],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool157],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool152],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

====================================

Anyone ?

Thanks,

1 REPLY

Re: HUM polling problem

Apparently your credentials seem to be wrong. Try re-adding them.

Regards

Farrukh

142
Views
0
Helpful
1
Replies
CreatePlease to create content