Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Initiate PPTP session 'from' Cisco 877w

Hi,

A client of mine needs to initiate a PPTP VPN 'from' a Cisco 877w router into a Windows Server 2008.

So have I have seen that VPDN should be used and have also stumbled across various scripts on the internet, however I cannot work out how to add them to my current 877 config(standard config initialising PPPoA session from Dialer 0-

Here is a script I found-

ip multicast-routing

no ip gratuitous-arps

service internal

vpdn enable

!

vpdn-group 1

request-dialin

protocol pptp

rotary-group 0

initiate-to ip SERVER IP

interface Dialer0

ip address negotiated

ip pim dense-mode

encapsulation ppp

dialer in-band

dialer idle-timeout 0

dialer string 111

dialer vpdn

dialer-group 1

no cdp enable

ppp pfc local request

ppp pfc remote apply

ppp encrypt mppe auto

ppp chap hostname USERNAME

ppp chap password PASSWORD

dialer-list 1 protocol ip permit

I added this to my working config- but no joy.

Please assist!

1 REPLY
Silver

Re: Initiate PPTP session 'from' Cisco 877w

You may try adding Zone-policy into your configuration (from out-zone to in-zone).

295
Views
0
Helpful
1
Replies