On a recent vpn implementation I was unable to browse the remote LAN via network neighborhood after connecting via Cisco vpn client using IPSec to a cisco 3015 cocentrator connected to a 4006 layer 3 switch, private interface of 4006 in vlan2 routed to NT4 servers in vlan1 on same 4006 switch through router blade in 4006 switch.
Are you getting the Wins server IP address on your vpn client connection (ie winipcfg/all). Browsing would only work with name resolution. Have you tried to browse just the ip address of the resource you are trying to get to? Could you ping by name?
You are correct once I had WINS and DNS configured correctly both on the PC and on the Concentrator I was able to browse correctly. Also the workgroup name in client for Microsoft networks had to be the same as the domain name. Yes I was able to ping by name, and I did logon to the domain.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...