Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

IPsec from pix 501 to pix 501

I am dealing with 2 domains owned by the same company. DomainA and DomainB are connected via pix 501s ipsec tunnel. Right now all the tunnel is being used for is passing mail. DomainA has an application that need to communicate with the workstations at DomainB. If I can ping by IP and I have created appropriate dns entries why can't I ping by netbios name? I have had very little exposure to cisco ios. How can I establish a domain trust across the current tunnel?

2 REPLIES
Gold

Re: IPsec from pix 501 to pix 501

IPsec does not encapsulate NetBIOS broadcast traffic. A WINS server is required to access to computers names. So try set Domain B WINs server for hosts in Domain A

M.

Hope that helps rate if it does

Community Member

Re: IPsec from pix 501 to pix 501

Yes you will need a Wins server or alternately you can add names and addresses to hosts file.

119
Views
0
Helpful
2
Replies
CreatePlease to create content