Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPSec on 2811

I have looked through the NetPro forums for a couple of days now and have not found my answer.

My question is, how do I setup an IOS based IPSec VPN tunnel using a 2811 with IOS os SP Services 12.4(13)?

Let me know if you need any more information.

Thank you,

Richard

1 ACCEPTED SOLUTION

Accepted Solutions

Re: IPSec on 2811

Richard,

I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:

Advanced Security

Advanced IP Services

Advanced Enterprise Services

You can order this feature set upgrade through your Cisco partner.

HTH,

Mark

5 REPLIES

Re: IPSec on 2811

Richard,

Are you planning to connect two of these routers for your VPN tunnel? Attached is a template I created a while back and may be useful for you. Also you can use the SDM GUI to create the tunnels. If you don't have the SDM files they can be downloaded here.

http://www.cisco.com/cgi-bin/tablebuild.pl/sdm

HTH,

Mark

New Member

Re: IPSec on 2811

Mark,

I am unable to input the command crypto isakmp...the only options under crypto are:

ca

engine

key

pki

provisioning

wui

What do I need to have in order to use VPN on this device?

I have attached a show version incase it may help.

Thanks,

Richard

Re: IPSec on 2811

Richard,

I was just looking at the feature navigator and it appears that the SP services IOS does not support Easy VPN. I would recommend using one of these feature sets:

Advanced Security

Advanced IP Services

Advanced Enterprise Services

You can order this feature set upgrade through your Cisco partner.

HTH,

Mark

New Member

Re: IPSec on 2811

thank you for your assistance.

Re: IPSec on 2811

You are most welcome! Glad I was able to help, and hope that template will be of use for you when you get the correct IOS loaded.

Best of luck!

Mark

266
Views
0
Helpful
5
Replies