IPSec VPN client IP does not get distributed via EIGRP
We are using an ASA for remote VPN access. It is running EIGRP and redistributes static routes. When an Anyconnect SSL client connects, the ASA creates a static route for that client and it gets redistributed via EIGRP. When a IPSec VPN client connects, the ASA creates a static route for that client but it does not get redisributed via EIGRP and hence that client can't reach anything. Why would it not distribute a static created by a IPSec client?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...