Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ISE 1.1 error displaying main page when looking on secondary node

Hello,

I did a ISE setup with a primary and a secondary node - basically it works fine.

My problem is when looking on th secondary node I get a certificate-error pointing that for looking on that page the browser gets information from the primary node which makes the browser not to display the info. On the primary it works fine.

First I used self-signe certificates, later I installed certificates frm the local CA - the problem stayed the same.

I tried with IE, Firefox and Chrome.

                  

When changing the primary/secondary role the problem moved always to the actual secondary node.

Has anyone an idea what to do here?

Andreas

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

ISE 1.1 error displaying main page when looking on secondary nod

If you are using self signed certs then you need to login to the seconeary node, once you trust that cert you will be able to see everything on the primary node.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
4 REPLIES
New Member

ISE 1.1 error displaying main page when looking on secondary nod

Looks like that after clearing with "clear ssl state) in IE9 it works. Unfortunatly clearing the certificates in Firefox didn't help.

ISE 1.1 error displaying main page when looking on secondary nod

If you are using self signed certs then you need to login to the seconeary node, once you trust that cert you will be able to see everything on the primary node.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
New Member

ISE 1.1 error displaying main page when looking on secondary nod

Just to add what Tarik helped me earlier with the same problem.

when accessing the secondary ISE use the full domain name, accept the security warning and go back re-login and you'll be fine.

The problem i had was that i was accessing the ise with IP address, now primary ISE is accessing the secondary (where the monitoring node is) with FQDN.

Hope it helps

New Member

Re: ISE 1.1 error displaying main page when looking on secondary

Hi,

Did you get the solution for this issue?

Sent from Cisco Technical Support iPad App

1197
Views
0
Helpful
4
Replies
CreatePlease to create content