Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

LAN TO LAN IPSEC TUNNEL CANNOT PING REMOTE NETWORK

VPN tunnel working fine, we can access machines on the remote network, connect via rdp but cannot ping.

We want to be able to ping from the 192.168.2.. network to the 192.168.1.. network

Current config attached

Any assistance would be greatly appreciated.

1 REPLY

Re: LAN TO LAN IPSEC TUNNEL CANNOT PING REMOTE NETWORK

the line

access-list outside_cryptomap_20 permit icmp ClubComUS 255.255.255.0 192.168.2.0 255.255.255.0

should be

access-list outside_cryptomap_20 permit icmp 192.168.2.0 255.255.255.0 ClubComUS 255.255.255.0

to allow icmp traffic to be tunneled form your inside 192.168.2.0 to 192.168.1.0

268
Views
0
Helpful
1
Replies
CreatePlease to create content