Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Local PIX blocking Local VPN Client from connecting to Remote

I have a PIX-506E set up locally and a PIX-506E set up at a Site 1. I can connect to Site 1 from my backup internet connection which isn't firewalled. When trying to connect to Site 1 through Local PIX I secure the communication tunnel.. but it will not let me remote desktop into any remote machines on that network. It will let me however if I use the non-firewalled backup connection.

Please inform me how to forward/allow access through the Local PIX so that the Local VPN client can access Site 1.

I was told to use NAT-T and forward UDP 4500 but I don't know how to do either of these.

Can anyone help please? I've been trying to get this working for almost 2 weeks.

Thank you.

1 REPLY
Green

Re: Local PIX blocking Local VPN Client from connecting to Remot

See you other post for answer on nat-t.

The reason this works from your other connection is you are probably not doing pat.

114
Views
0
Helpful
1
Replies
CreatePlease login to create content