Is there a management suite available out there from Cisco that allows to manage VPN 3000 concentrators in large enterprise networks? We would like to do a minimum configuration of the devices via their build-in CLI oder webinterface and then import them into an enterprise management solution's inventory without the need to touch the build-in interfaces again later. Everything that is beyond the basic setup (setting VPN tunnels, encryption parameters, a.s.o) should be done via the management solution in an enterprise context. Something like Cisco's Security Manager that unfortunately does not support VPN concentrators.
You will have to directly use the VPN Concentrator Manager for the concentrator itself for configuring and troubleshooting. I don't think there is a management suite available to manage VPN concentrators.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...