We have a 501 and are using cisco vpn client. We have a Windows 2000 and a windows 2003 server on the network we are connecting to. We use windows authentication when we logon the vpn. We are mapping drives on both servers onto the client. The mapped drives on the 2000 server are visable to the client. The mapped drives on the 2003 server are not even when we try to remap. We have Routing and Remote Access enabled on the 2003 server but still fail to map the drives (or ping the 2003 server). Can anyone out there shed any light on our problem. Thanks
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...