I have configured our VPN 3000 (running VPN 3000 Concentrator Series Version 3.0.2.Rel) for a maximum connection time of 480 minutes. I configured the Base Group for the 480 minute maximum connection time and then used the check box to cause the other groups to inherit those settings. I have even configured individual groups for a 480 minute maximum connection time and removed the check mark froim the inherit box. Neither method seems to work. I still have several people that exceed the maximum time. Any suggestions?
This is a known problem in this older version of code. Setting the max connect time to 389 minutes or higher doesn't work, the workaround is to set it to 388 minutes or less, then you should be OK. This was fixed way back in 3.1 code, so upgrading to the latest 3.6 should resolve the problem also (if you want to leave it at 480 minutes)
If you dont do anything, at least do this. Get out of 3.0.2 and upgrade your 3000. If you take a look under Management/Files you will more than likely see a crash log. This code has had some issues with crashing quite a bit. No need to send or open a case with tac, they will also tell you to upgrade. Good Luck.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...