Migrating Security Manager to a New Computer or Operating System
following cisco guide about "Migrating Security Manager to a New Computer or Operating System" : When you are not changing the Security Manager version, but you are changing the physical hardware or the operating system.
My question is :
if i want to Migrating Security Manager from v3.0 to v4.0 changing the following :
csm v3.0 to csm v4.0;
S.O 2003 server (physical hardware) to 2008 server(VMware Esxi v4.0) ..... (remote migration)
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...
Unable to get signature update from cisco.com
1. Make sure the router can get name resolution. Configure the router with a proper DNS name server.
ISR4451#utd threat-inspection signature update server cisco username xxxxx password yyyyy