I am having problem connecting multiple VPN clients from the same remote location to the central office. The remote location has cisco 2621 router doing NAT and providing internet access to remote host. The central Office has a Cisco PIX configured to allow VPN Clients network access.
If I initiate the VPN Client from the first host, it connects and any other host that try to connect thereafter comes with "Remote peer no longer responding". If I drop the connected host, then another host will connect. Only one host at a time.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...