07-01-2009 01:51 AM - edited 02-21-2020 03:32 AM
Hi,
We have an ASA5510 set for VPN connections. We have 3 clients that will simultaneously connect to our VPN using one Public IP since they are located in one office. I have observed that only one connection are able to successfully connect. Is there a way to allow multiple connection from a single public IP?
Hope someone will reply. Thanks.
07-01-2009 10:31 AM
You will want to make sure that the ASA is configured to support NAT-T. To enable NAT-T, you will issue the following command: crypto isakmp nat-traversal 10. Please test with this command in place and report back.
07-01-2009 05:07 PM
Hi topula, thanks for the reply. I will test it now then I will give you feedback. Can you please kindly tell me what this command do?
07-02-2009 11:03 PM
Hi topula, your suggestion solved my problem. Thanks for the help. I will rate your help accordingly.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: