Ok, so I've got a standard DSL internet connection, with the modem having a web GUI that is only accessible by it's public IP from "inside" the DSL network side. I have a VPN tunnel up from HQ to the office. I would like to setup NAT so that I can hit that DSL modem web GUI from behind my VPN connection. For this example's sake, let's state the following:
- DSL public network is 220.127.116.11/24
- My VPN router (831) is at 18.104.22.168/24 on the outside
- My VPN router (831) is at 10.0.0.1/24 on the inside
- My HQ network is is available to that office on 192.168.0.0/24
GOAL: Machines on 192.168.0.0/24 can reach 10.0.0.0/24 just fine. I'd like to setup a "NAT" or "static pipe" or something to allow machines on 192.168.0.0/24 to reach 22.214.171.124 from the VPN tunnel side by specifying a destination of say 10.0.0.50, and having that NAT or translate somehow into 126.96.36.199.
Hope this is making sense to somemone. Thanks in advance.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...