Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NATing with Duplicate Subnets

I have an issue where I need to set up a site to site VPN with a partner company through a PIX. The partner company has a site to site tunnel with a vendor that is a duplicate subnet to ours (10.0.0.0/16). Can anyone point me in the right direction as to performing a NAT on a PIX to change my subnet to the partner to look like 10.241.21.0/24? Thanks in advance for any and all help provided.

2 REPLIES
Silver

Re: NATing with Duplicate Subnets

New Member

Re: NATing with Duplicate Subnets

Thanks for the input. I have seen that article and it does not apply to my situation. There is also an article regarding a PIX and a 3000 concentrator that is very close, but not quite what I am looking for. See this article also...

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml

Thanks again for the input....

130
Views
0
Helpful
2
Replies
CreatePlease login to create content