Need help to configure Cisco 1720 to allow client to VPN through

[asommer]

I need help on any commands that will allow me to VPN from a 2k worksation using the latest version of Cisco VPN client through a CIsco 1720 router. To a PIX firewall.

What commands do I need on the 1720 router?

Should I use NAT 1-to -1 translation?

I appreciate any help.

[r-simpson]

Not sure of the exact commands, but try these docs.

http://www.cisco.com/en/US/partner/tech/tk648/tk367/technologies_configuration_example09186a00800949db.shtml

http://www.cisco.com/en/US/partner/tech/tk648/tk367/technologies_configuration_example09186a00800949fb.shtml

[kdurrett]

Yes, connecting a client to a pix behind a nat/pat device you will need to have a 1 to 1 nat translation configured on the nat device. It wont work with PAT as of yet to the pix.

[asommer]

Thanks a lot for the reply. Ya I finally figured that out after beating my head against a brick wall for about 6 hours. Anyway I appreciate the reply.