Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Newbie question on TACACS server access

I worked before on TACACS servers running on Windows but not on Unix. I am new to an environment without any documentation and I need to make sure I have access to the TACACS/ACS config.

I go to my switch config and I see that 'tacacs-server 10.0.0.1'.

Then I ssh into '10.0.0.1' and I see the below after doing 'ls'.

From the below, do you have any idea on how I access the ACS configuration in case I need to alter any parameter there? I tried http://10.0.0.1 but that does not work.

-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: Newbie question on TACACS server access

Try http://10.0.0.1:2002 because ACS listens on port 2002 by default.

Pete

Re: Newbie question on TACACS server access

I worked before on TACACS servers running on Windows but not on Unix. I am new to an environment without any documentation and I need to make sure I have access to the TACACS/ACS config.

I go to my switch config and I see that 'tacacs-server 10.0.0.1'.

Then I ssh into '10.0.0.1' and I see the below after doing 'ls'.

From the below, do you have any idea on how I access the ACS configuration in case I need to alter any parameter there? I tried http://10.0.0.1 but that does not work.

-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol

Hi,

Genrally to access ACS server default port is the server ip address and port in which the ACS gives the gui interface is 2002.so access the ACS server on port 2002 then see are you able access the ACS or not.

Hope to help

Regards

Ganesh.H

3 REPLIES
New Member

Re: Newbie question on TACACS server access

Try http://10.0.0.1:2002 because ACS listens on port 2002 by default.

Pete

Re: Newbie question on TACACS server access

I worked before on TACACS servers running on Windows but not on Unix. I am new to an environment without any documentation and I need to make sure I have access to the TACACS/ACS config.

I go to my switch config and I see that 'tacacs-server 10.0.0.1'.

Then I ssh into '10.0.0.1' and I see the below after doing 'ls'.

From the below, do you have any idea on how I access the ACS configuration in case I need to alter any parameter there? I tried http://10.0.0.1 but that does not work.

-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol-bash-3.00$ ls
bin         devices     kernel      net         sbin        TT_DB
boot        etc         lib         opt         system      usr
cdrom       export      lost+found  platform    tftpboot    var
dev         home        mnt         proc        tmp         vol

Hi,

Genrally to access ACS server default port is the server ip address and port in which the ACS gives the gui interface is 2002.so access the ACS server on port 2002 then see are you able access the ACS or not.

Hope to help

Regards

Ganesh.H

New Member

Re: Newbie question on TACACS server access

It turned out this is not even ACS.

A previous admin installed whatever open source or hacked system he found and used as TACACS.

Thanks folks.

714
Views
0
Helpful
3
Replies