Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Physically moving CW2000 Server to a new Network

Recently I've installed a CW2000 LMS Server in my Test environment. After successful operation I moved this Box to a new Network and changed the SNMP Communities on the Server. After that ANI Server gives me an error.

I can't syncronize RME with the ANI Server, because the ANI Server is not running.

When I have a look at the Service the following appeares:

"ANIServer is running - but busy flag is set"

I din't found usefull Informations on the Web.

Does anybody have an idea?

Thanks for a Hint

1 REPLY
Blue

Re: Physically moving CW2000 Server to a new Network

CW2000 requires a static ip address. Since you moved the box to a new network, the ip address is chnaged now (so could be the hostname). In this case, you can either:

1) Re-install CW2K on the new network server or

2) Update the necessary files with the new info as in the tech tips:

http://www.cisco.com/warp/public/477/RME/sol_hostname.html

http://www.cisco.com/warp/public/477/RME/winnt_hostname.html

162
Views
0
Helpful
1
Replies