Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 501 Access-list, source unpriv. ports, dports, timeout

I am used below rules for PIX 501.

Rules for PIX#1

access-list securetytraffic permit tcp host 192.168.1.1 gt 1024 host 192.168.2.1 eq 80

access-list securetytraffic permit udp host 192.168.1.1 gt 1024 host 192.168.2.1 eq 80

access-list securetytraffic permit tcp host 192.168.1.1 gt 1024 host 192.168.2.1 eq 110

access-list nonat permit ip host 192.168.1.1 host 192.168.2.1

nat (inside) 0 access-list nonat

nat (inside) 1 192.168.1.1 255.255.255.255 0 0

Rules for PIX#2

access-list securetytraffic permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0

..............................

After some period of times (hours), there is no traffic through PIX#1 and PIX#2.

I can't understand, where is problem?

146
Views
0
Helpful
0
Replies
CreatePlease login to create content