Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX 501 Clent and Site-to-Site VPN together

We have set up our PIX 501 to let remote clients (4.9.00.0440) VPN to the home office (and see the local LAN) and a site-to-site tunnel from the home office to our internet ded server. I need the remote clients to be able to access the remote site directly by going through the home office. By "directly", I mean be able to ping the IP address of the remote site successfully. Is this possible? If so, how? Thanks, Max

1 REPLY
Cisco Employee

Re: PIX 501 Clent and Site-to-Site VPN together

John,

Good News is, this is possible with Pix 7.x. Please refer the below URL for details:

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

Bad news is, 7.x code is not supported on pix 501 and 506. So, with the Pix 501, you will not be able to set up the scenario you mentioned.

I hope it helps.

Regards,

Arul

** Please rate all helpful posts **

96
Views
0
Helpful
1
Replies