Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PPTP VPN to PIX 515

I have a PIX 515 configured to accept w2000 VPN PPTP.

The point is , when appears ' Verifying user/pass' the error that appears next is 'the remote computer is not responding'

Can anyone help me on this

Regards

Sérgio Sousa

1 REPLY
Gold

Re: PPTP VPN to PIX 515

Sergio,

I have just tested the following configuration on my lab PIX 515. I connected to the PIX using a dialup to the ineternet from my laptop and setup a PPTP connection from it to the PIX and it works with no problem.

access-list pptp permit ip 10.x.x.x 255.255.255.0 172.x.x.x 255.255.255.128

ip local pool pptp_dial_in 172.x.x.1-172.x.x.10

nat (inside) 0 access-list pptp

sysopt connection permit-pptp

vpdn group PPTP-VPDN-GROUP accept dialin pptp

vpdn group PPTP-VPDN-GROUP ppp authentication chap

vpdn group PPTP-VPDN-GROUP ppp authentication mschap

vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto

vpdn group PPTP-VPDN-GROUP client configuration address local pptp_dial_in

vpdn group PPTP-VPDN-GROUP client configuration dns

vpdn group PPTP-VPDN-GROUP client configuration wins

vpdn group PPTP-VPDN-GROUP pptp echo 60

vpdn group PPTP-VPDN-GROUP client authentication local

vpdn username password

vpdn enable outside

I hope this helps.

Jay

161
Views
0
Helpful
1
Replies
CreatePlease to create content