Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

"IP Gateway" returned to client is wrong with Cisco Anyconnect

Hi,

I am using Cisco Anyconnect 2.3.0185 and Asa 8.0(4).

IP address are assigned statically by ACS.

I specify IETF Rdaius Attibutes 9 (Framed-IP-Netmask) to return the correct mask (255.255.255.255 like a ppp session).

But the IP Gateway returned to the client is not his own IP address and is another ip (i don't know how this other ip is returned ???) whereas it's working fine with Cisco VPN client Version 5 (<IP_Gateway> = <Static_IP>....

Do you have idea to correct the problem ?

Thks&rgds.

David

1 REPLY
Anonymous
N/A

Re: "IP Gateway" returned to client is wrong with Cisco Anyconne

Make sure that you have at least one RADIUS or TACACS+ AAA client configured in the Network Configuration section and that, in the Interface Configuration section, you have enabled the attributes you need to configure.

Note Some attributes are not customer-configurable in Cisco Secure ACS; instead, their values are set by Cisco Secure ACS.

Related URL:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/3.3/user/guide/aa.html#wp563579

299
Views
0
Helpful
1
Replies
CreatePlease to create content