Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RADIUS config for VRF-aware VPDN multihop tunnel

Hi,

Can't find the LNS config directives those will lead to get complete(!) vpdn profile from radius.

The configuration is:

LAC-LNS/PE-LNS/CE

LNS/PE - provider edge lns that we want to configure using radius profile for vrf-aware multihop vpdn so that incoming tunnel is switched out to LNS/CE in one of the vrfs configured on LNS/PE.

The "vpdn tunnel authorization " command lets me get the profile for ingress session coming from LAC, but in order to switch the tunnel further to LNS/CE i have to config vpdn-group on LNS/PE. Is it possible to make a RADIUS profile that LNS/PE will use for both ingress and egress tunnels?

1 REPLY

Re: RADIUS config for VRF-aware VPDN multihop tunnel

Hello Alex,

I would like to point you to this forun into another section. There is currently a "Ask The Expert" about MPLS VPNs at http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dda563c

Maybe it will be more suitable to address your questions there.

Hope this Helps!

Regards, Martin

432
Views
0
Helpful
1
Replies
CreatePlease to create content