On router R1, you would have an EEM policy which reacts to whatever event in which you are interested. This policy would then send a trap to router R2. R2 would intercept the trap, and perform the required actions. For example:
Router R1 (10.1.1.1):
event manager applet watch-syslog
event syslog pattern "OSPF-5-ADJCHG"
action 1.0 snmp-trap intdata1 424242
snmp-server enable traps event-manager
snmp-server host 126.96.36.199 traps public event-manager
Router R2 (188.8.131.52):
event manager applet trap-from-r1
event snmp-notification oid 184.108.40.206.220.127.116.11.18.104.22.168.1.9. oid-val 424242 op eq src-ip-address 10.1.1.1
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...