Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

router to pix vpn ipsec - bandwidth issue

I basically followed the config example of cisco in :

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml

it works fine.

my pb is:

the remote site has a 2Mbps line but once the tunnel is up, even without traffic in the tunnel, the link between any client behind the router and a line tester in the OUTSIDE world (internet) will give very poor results.....

what could be wrong ?

no crc error, no error at all, just that the bandwidth with the outside world is vanishing

any idea?

1 REPLY
Silver

Re: router to pix vpn ipsec - bandwidth issue

Did you apply any QOS on the link?

104
Views
0
Helpful
1
Replies
CreatePlease login to create content