Site to Site VPN Tunnel UP Cant not access the remote side
I have established a site to site vpn between 1841 route and PIX 515, the tunnel is up but I am not been able to access the PIX 515 side. I have checked most of the things on 1841 side as soon i generate traffic from my side the VPN tunnel gets up but still I am not been able to access the 515E side
Re: Site to Site VPN Tunnel UP Cant not access the remote side
Perhaps if you provided some details, especially the access list from the 1841 that defines interesting traffic and the corresponding access list from the PIX, then we might be able to identify the issue.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...