06-30-2007 11:25 AM - edited 02-21-2020 01:35 AM
I'm trying to create a site-to-site connection between a ASA5505 and a Linksys BEFVP41. The remote site BEFVP41 connects but I can't get any traffic to the head-office network.
remote = 188.88.9.0 /24
headoffice = 188.88.8.0 /24
Config attached.
Solved! Go to Solution.
07-11-2007 08:33 AM
Hello,
Did you get this working. I looked at the config on the ASA and according to what you have stated, it seems that you want to encrypt between 188.88.8.0/24 to 188.88.9.0/24 - But your access-list for encryption states
access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 host 207.216.215.135
This is going to encrypt traffic originating from 188.88.8.0/24 to the host 207.216.215.135
IS that what you want to do?
Is that how it is configured on the linksys side?
Thanks
Gilbert
07-11-2007 08:33 AM
Hello,
Did you get this working. I looked at the config on the ASA and according to what you have stated, it seems that you want to encrypt between 188.88.8.0/24 to 188.88.9.0/24 - But your access-list for encryption states
access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 host 207.216.215.135
This is going to encrypt traffic originating from 188.88.8.0/24 to the host 207.216.215.135
IS that what you want to do?
Is that how it is configured on the linksys side?
Thanks
Gilbert
07-16-2007 12:21 PM
Thanks for your reply Gilbert.
I haven't managed to get this going yet.
I do want to encrypt data between 188.88.8.0/24 and 188.88.9.0/24.
How would I go about making the change you suggest?
Thanks B4Hand,
Brad
07-16-2007 12:27 PM
Give gilbert credit for this one...
access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 188.88.9.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 188.88.8.0 255.255.255.0 188.88.9.0 255.255.255.0
07-16-2007 12:35 PM
Thank-you ever so much for the quick response. I will hopefully get a chance to implement and test this later tonight.
Cheers,
Brad
07-17-2007 06:09 AM
I applied the suggested solution and it worked like a charm. Thank-you very much for the excellent information.
Cheers,
Brad
07-17-2007 06:15 AM
Adam,
Thanks and
Brad,
I am glad you got it to work.
Cheers,
Gilbert
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: