Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Site to site with an ASA5505 to a Linksys BEFVP41

I'm trying to create a site-to-site connection between a ASA5505 and a Linksys BEFVP41. The remote site BEFVP41 connects but I can't get any traffic to the head-office network.

remote = 188.88.9.0 /24

headoffice = 188.88.8.0 /24

Config attached.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Hello,

Did you get this working. I looked at the config on the ASA and according to what you have stated, it seems that you want to encrypt between 188.88.8.0/24 to 188.88.9.0/24 - But your access-list for encryption states

access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 host 207.216.215.135

This is going to encrypt traffic originating from 188.88.8.0/24 to the host 207.216.215.135

IS that what you want to do?

Is that how it is configured on the linksys side?

Thanks

Gilbert

6 REPLIES
Cisco Employee

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Hello,

Did you get this working. I looked at the config on the ASA and according to what you have stated, it seems that you want to encrypt between 188.88.8.0/24 to 188.88.9.0/24 - But your access-list for encryption states

access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 host 207.216.215.135

This is going to encrypt traffic originating from 188.88.8.0/24 to the host 207.216.215.135

IS that what you want to do?

Is that how it is configured on the linksys side?

Thanks

Gilbert

New Member

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Thanks for your reply Gilbert.

I haven't managed to get this going yet.

I do want to encrypt data between 188.88.8.0/24 and 188.88.9.0/24.

How would I go about making the change you suggest?

Thanks B4Hand,

Brad

Green

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Give gilbert credit for this one...

access-list outside_60_cryptomap extended permit ip 188.88.8.0 255.255.255.0 188.88.9.0 255.255.255.0

access-list inside_nat0_outbound extended permit ip 188.88.8.0 255.255.255.0 188.88.9.0 255.255.255.0

New Member

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Thank-you ever so much for the quick response. I will hopefully get a chance to implement and test this later tonight.

Cheers,

Brad

New Member

Re: Site to site with an ASA5505 to a Linksys BEFVP41

I applied the suggested solution and it worked like a charm. Thank-you very much for the excellent information.

Cheers,

Brad

Cisco Employee

Re: Site to site with an ASA5505 to a Linksys BEFVP41

Adam,

Thanks and

Brad,

I am glad you got it to work.

Cheers,

Gilbert

196
Views
20
Helpful
6
Replies