Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SNMP configuration on 3548xl cluster.

I know that a cluster member will send the traps to the cluster commander but is there anything I have to configure (trap wise) from the member side?

My config is as follows from the cluster commander.

conf t

logging on

logging 1.1.1.1

logging trap informational

snmp-server community public RO

snmp-server community private RW

snmp-server host 1.1.1.1 traps

1 REPLY
Blue

Re: SNMP configuration on 3548xl cluster.

Looks ok.

324
Views
0
Helpful
1
Replies
CreatePlease to create content