Steel-Belted Radius server does not show sessions from Cisco5520
VPN Remote clients are successfully authenticated through Steel-Belted Radius when connecting to Cisco5520.
For some wierd reason those sessions are not visible in "Current sessions" of the SBR Administrator although Radius logs confirm that the session is established.
On SB Radius server, cisco 5520 is configured as a Radius client, make/model: Cisco PIX Firewall(or Cisco VPN 3000 concentrator ) with cisco3k.dct dictionary (Radius vendor.ini file updated) Has anybody seen this problem before? What is missing? Many thanks in advance.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...