question one:cw2k can't display gauges at localhost,the java applet dispaly 'Not able to connect with the server".
But it works fine while i open 1741 port at another pc,a new problem came out is if I push the refresh button, a "Access Control Error: Invalid or Insufficient Access Level." message will appeard,and all my cw2k window can't do any thing. I had to login again.
question two:cw2k cd one can't send any snmp packet while the cw2k server 's ip address is 10.8.1.122 or 10.8.1.112,but all is fine while the ip address is 172.16.8.3.very strange ? use the diag tools.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...