Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Syslog througth vpn tunnel with Pix

I'm using PIX 501 and PIX 506E in easy vpn mode with PIX 515 on central site.

PIX 501 are in pppoe and the public IP change every day.

I need to receive syslog from PIX 501 and 506 through tunnel IpSec. How can I configure my PIX to send syslog message to central site ?

2 REPLIES
Bronze

Re: Syslog througth vpn tunnel with Pix

Check out the following URL on how to setup the whole thing,

http://www.cisco.com/warp/public/110/pix_vpn_4094.html

New Member

Re: Syslog througth vpn tunnel with Pix

Thank you but my public adress change every day and in this sample we need to have static public address.

The solution is to use PIX version 6.3.1 and activate command management-access and we can send all syslog through tunnel, made telnet from central site .....

165
Views
0
Helpful
2
Replies