Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC500 and VPN server

I want to setup a UC500 vpn server so I can connect to it with the microsoft VPN client in winXP/Vista. Is this possible ?

And how ?

Thx

Filip

2 REPLIES

Re: UC500 and VPN server

I think this is what you need:

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml

Please note that regardless of this being for a differnet platform, the IOS is the same on any platform, so you can follow this guide.

New Member

Re: UC500 and VPN server

I've added the following

vpdn-group 1

! Default PPTP VPDN group

accept-dialin

protocol pptp

virtual-template 1

ip local pool default 192.168.0.180 192.168.0.199

interface Virtual-PPP1

ip unnumbered FastEthernet0/0

peer default ip address pool default

no keepalive

ppp encrypt mppe auto

ppp authentication pap chap ms-chap

!

interface Virtual-Template1 type tunnel

ip unnumbered FastEthernet0/0

- There is no PPP comand in Virtual-Template 1

I'm receiving following debug info

022340: .Jan 26 22:20:23.098: Vp1 LCP: Timeout: State REQsent

022341: .Jan 26 22:20:23.098: Vp1 LCP: O CONFREQ [REQsent] id 94 len 14

022342: .Jan 26 22:20:23.098: Vp1 LCP: AuthProto PAP (0x0304C023)

022343: .Jan 26 22:20:23.098: Vp1 LCP: MagicNumber 0x3F6D5E94 (0x05063F6D5E94)

022344: .Jan 26 22:20:25.114: Vp1 LCP: Timeout: State REQsent

022345: .Jan 26 22:20:25.114: Vp1 LCP: State is Listen

022346: .Jan 26 22:20:45.682: VPDN Received L2TUN socket message

022347: .Jan 26 22:20:45.690: VPDN Tnl/Sn 33 31 L2TUN socket session accept requested

022348: .Jan 26 22:20:45.690: VPDN Tnl/Sn 33 31 Setting up dataplane for L2-L2, no idb

022349: .Jan 26 22:20:45.698: VPDN Received L2TUN socket message

022350: .Jan 26 22:20:45.702: VPDN uid:31 VPDN session up

022351: .Jan 26 22:20:45.710: PPP: Send Message[Disconnect]

022352: .Jan 26 22:20:45.710: VPDN uid:31 disconnect (L2X) IETF: 9/nas-error Ascend: 66/VPDN Local PPP Disconnect

022353: .Jan 26 22:20:45.710: VPDN Unknown vpdn syslog error due to AAA disconnect code 66

022354: .Jan 26 22:20:45.710: VPDN uid:31 vpdn shutdown session, result=2, error=6, vendor_err=0, syslog_error_code=0, syslog_key_type=1

022355: .Jan 26 22:20:45.710: VPDN uid:31 VPDN/AAA: accounting stop sent

022356: .Jan 26 22:20:45.730: VPDN Received L2TUN socket message

022357: .Jan 26 22:20:45.730: VPDN Failed to get session from socket handle C000001E

022358: .Jan 26 22:20:50.394: VPDN Received L2TUN socket message

022359: .Jan 26 22:20:50.406: VPDN Tnl/Sn 34 32 L2TUN socket session accept requested

022360: .Jan 26 22:20:50.406: VPDN Tnl/Sn 34 32 Setting up dataplane for L2-L2, no idb

022361: .Jan 26 22:20:50.414: VPDN Received L2TUN socket message

022362: .Jan 26 22:20:50.418: VPDN uid:32 VPDN session up

022363: .Jan 26 22:20:50.426: PPP: Send Message[Disconnect]

022364: .Jan 26 22:20:50.426: VPDN uid:32 disconnect (L2X) IETF: 9/nas-error Ascend: 66/VPDN Local PPP Disconnect

022365: .Jan 26 22:20:50.426: VPDN Unknown vpdn syslog error due to AAA disconnect code 66

022366: .Jan 26 22:20:50.426: VPDN uid:32 vpdn shutdown session, result=2, error=6, vendor_err=0, syslog_error_code=0, syslog_key_type=1

022367: .Jan 26 22:20:50.426: VPDN uid:32 VPDN/AAA: accounting stop sent

022368: .Jan 26 22:20:50.446: VPDN Received L2TUN socket message

Any ideas

Thx

Filip

907
Views
0
Helpful
2
Replies
CreatePlease to create content