Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unable to access web server of DMZ Zone from Inside interface

Hi,

 

please  help  me to  resolve  the issue.  i have  created  a DMZ  Zone   Network  with  public  IP Addresses.

i have  created   Identity   nat  for  DMZ  Network  access the internet.  The  server  in the DMZ  Is  accessable  from  Internet.

To  access the server  from  inside  interface  created  ACE and  NAT exampt  . Able  to ping  and   trace  the  DMZ Server  from  Inside interface  but  unable  to  open  page  or  access the web  server from  inside interface.

please  guide  to resolve  the issue.

 

Regards,

Saroj

2 REPLIES
New Member

Hi Saroj,If server is ping

Hi Saroj,

If server is ping-able from inside but specific page or application is not accessible, you need to check access-list to verify relevant TCP port are properly allowed for traffic from inside to DMZ or not.

 

Don't forget to rate helpfull posts

Sajid Ali Pathan

New Member

Hi, In the  access  list 

Hi,

 

In the  access  list  from  the  inside  to  Dmz   the  services   permit  set  is  IP.

8TrueLAN-NSGbolck16/22DMZ-HOSTipPermitDefault  

 

Regards,

Saroj

98
Views
0
Helpful
2
Replies