Unable to Remote Desktop to workstation defined in MGMT interface
As an administrator, I have my office computer defined as a static route on the management interface of my ASA. I wanted the ASA to understand that my computer is allowed for management of the ASA using the ASDM GUI.
From an outside Internet link, I established an VPN connection to my work network via the ASA. I attempted to Remote Desktop to my office computer in order to do some ASA configuration. I'm unable to establish a RDP connection.
Remote Desktop definitely is working on my home computer and my office computer accepts requests. I did some packet trace and noticed that the Remote Desktop requests definitely stops at the ASA.
I'll hold off on details so that this post won't be lengthy. Just looking to see if anyone else has encountered a similar Remote Desktop issue on the management-only interface.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...