Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Understanding SYSLOG trap information

Hi!

I want to send syslog errors to my SNMP server which works fine via:

snmp-server enable traps syslog

snmp-server host <ip> <string> syslog snmp

logging history errors

However while I see the exact error description in SYSLOG:

.Mar 8 10:03:14 UTC: %SPANTREE-2-BLOCK_BPDUGUARD: Received BPDU on port FastEthernet6/26 with BPDU Guard enabled. Disabling port.

.Mar 8 10:03:14 UTC: %PM-4-ERR_DISABLE: bpduguard error detected on Fa6/26, put

ting Fa6/26 in err-disable state

This is what I get on the SNMP server:

1141808594 1 Wed Mar 08 10:03:14 2006 <device name> -BLOCK_BPDUGUARD;1 .1.3.6.1.4.1.9.9.41.2.0.1 0

and nothing more. The OID is:

clogMessageGenerated

but no info on which ports are blocked as seen in the syslog itself.

Is there a way to get this info via the syslog trap? I loaded the CISCO-SYSLOG-MIB onto the SNMP server but no change.

Any suggestions? Many thanks...

265
Views
0
Helpful
0
Replies
CreatePlease to create content