Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Voice over PIX VPN?

I have a LAN2LAN VPN between a PIX 501 and 3030. I want to be able to connect a phone at the remote site. The tunnel is up and I can ping the phone but it doesn't connect to the CM. Is there something I have to configure on the PIX to allow the phone to connect?

Any help is appreciated.

Thanks

2 REPLIES

Re: Voice over PIX VPN?

Hi

Though i am not sure about the ports being used by CM would suggest to check the same and open up the same in PIX end so that you can establish the connectivity with the CM..

regds

New Member

Re: Voice over PIX VPN?

You can also try telneting to the phone / CM from each end once you have to ports worked out. that way you can test the connectivity at that port. You should also have a traffic monitor on the CM so you can see if the phone is actually trying to register.

Tim

130
Views
0
Helpful
2
Replies
CreatePlease login to create content