Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN 3000 Concentrator

Does anyone know where I can find the meaning of this message?

465 10/28/2008 14:48:06.640 SEV=4 IKEDBG/97 RPT=410 208.96.196.242

Group [208.96.196.242]

QM FSM error (P2 struct &0x6810ef4, mess id 0xeb16b91f)!

466 10/28/2008 14:48:06.640 SEV=7 IKEDBG/65 RPT=39116 208.96.196.242

Group [208.96.196.242]

IKE QM Initiator FSM error history (struct &0x6810ef4)

<state>, <event>:

QM_DONE, EV_ERROR

QM_WAIT_MSG2, EV_TIMEOUT

QM_WAIT_MSG2, NullEvent

QM_SND_MSG1, EV_SND_MSG

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: VPN 3000 Concentrator

Hi,

QM FSM Error

The IPsec L2L VPN tunnel does not come up on the PIX firewall or ASA, and the QM FSM error message appears.

One possible reason is the proxy identities, such as interesting traffic, Access Control List (ACL) or crypto ACL, do not match on both the ends. Check the configuration on both the devices, and make sure that the crypto ACLs match.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml#qms

Regards,

Arul

*Pls rate if it helps*

2 REPLIES
Cisco Employee

Re: VPN 3000 Concentrator

Hi,

QM FSM Error

The IPsec L2L VPN tunnel does not come up on the PIX firewall or ASA, and the QM FSM error message appears.

One possible reason is the proxy identities, such as interesting traffic, Access Control List (ACL) or crypto ACL, do not match on both the ends. Check the configuration on both the devices, and make sure that the crypto ACLs match.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtml#qms

Regards,

Arul

*Pls rate if it helps*

New Member

Re: VPN 3000 Concentrator

Yes this makes it clearer, just a fyi found out the the distant end didn't have a route back. Thanks for your help!!!!

374
Views
0
Helpful
2
Replies