Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN 3005 Hardware upgrade to 3030 with same config files

We upgraded to a new hardware and transfered the config file from the 3005 and noticed under \Configuration\administration\Monitoring\ the "Concurrent Sessions Limit" showed up as 100 on the 3030.

Going through the config text file under [sessions] we changed

sessionLimit=100 to =0.

After reloading the "Concurrent Sessions Limit" now shows 1500.

Have I missed anything else in config file that is specific to the 3005 hardware that I need to adjust for in the 3030?

Thanks.

1 REPLY
Bronze

Re: VPN 3005 Hardware upgrade to 3030 with same config files

The "Concurrent Sessions Limit" parameter is indeed model dependant. It is 1500 for the 3030 and this is the value that you should be seeing if all is working fine. The parameter is visible in Administration > Administer Sessions in the Session Summary table.

142
Views
0
Helpful
1
Replies