Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN and Port Translation

Hello.

We have successfully set up a VPN configuration for many Dial-in Cisco VPN Client into our 515E box (version is 7.0).

Each user has its own IP statically assigned (no IP Pools). All IPs are in the range 10.81.60.0/24.

We use nat exemption so that the PC on VPN network 10.81.60.x can connect to 10.95.x.x without translation.

Now the question: After the VPN is established we need to connect from a machine on 10.95.x.x to a PC on 10.81.60.x with *port translation*. Example: 10.95.1.1 trying to connect to port 21 at 10.81.60.100 should be translated to 9000 @ 10.81.60.100. Is this possible?

Thanks.

1 REPLY
Cisco Employee

Re: VPN and Port Translation

I do not think this can be done.

Since you are doing NAT exemption, the packets will be exempted through the NAT process.

So, in short what you are trying to do cant be done.

Thanks

Gilbert

163
Views
0
Helpful
1
Replies
CreatePlease login to create content