Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Vpn and RDC printing

I have a client that is running a vpn with a 2651. They connect the VPN with

4.8.02 software.

the VPN connects fine, and they can connect with RDC, and disc drives will show up if the option is checked, but the printers are not pulling to the host machine. All the drivers are loaded etc. The host machine is XP SP2

Is there a setting/port they are missing on the 2651?

I'm sure it is something basic, but it is a new network for me.

1 REPLY
New Member

Re: Vpn and RDC printing

Hi

Could you try the following:

Go to the Properties of the Ethernet Adapter.

Select TCP/IP and click Properties.

Click Advanced.

Click the WINS tab.

Check the Enable NetBIOS over TCP/IP option.

Then give it a try.

Regards MJ

235
Views
0
Helpful
1
Replies