Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN client duplicate MAC addresses

Hello all,

We have an issue with McAffe EPO engine v3.6.0.574 while rebuilding users' GuIDs for the users connected through VPN with VPN client v4.8.02.0100. The EPO rebuilds the GuID using the user's MAC address. The problem is that the VPN client v4.8.02 assigns the same MAC address (00-05-9A-3C-78-00) to all users.

Can anybody tells us how can we solve this? We have only recently updated the VPN client from v4.6 to 4.8. the same problem was noticed with v4.6.

Is this a known issue with Cisco VPN client?

4 REPLIES
Silver

Re: VPN client duplicate MAC addresses

Might be any connectivity issues. Verify the configuration. since this info is just to achieve connectivity between the client, concentrator and the inside LAN

New Member

Re: VPN client duplicate MAC addresses

Could you be more explicit please. Our configuration works perfectly well for years causing no VPN connectivity issues.

Actually this problem becomes disturbing only when our ePO server needs to re-build a user profile basing it on the user's MAC address. As the VPN MAC is not unique, the replicated profile is wrong when two users belong to different profile groups.

New Member

Re: VPN client duplicate MAC addresses

Ok.

We had the same problem a couple of weeks ago.

We were not able to solve the problem with Cisco. And until now it's not resolved.

But you can do a workaround.

You can add a key to the EPO server stating that you don't wnat to take care of the MAC adress. EPO will resolve only with the GUID of the client.It is the KB45372 from the McAfee knowledgebase.

Hope it help.

And if you have answers about the MAC from CISCO I would be interested to know.

Ben

New Member

Re: VPN client duplicate MAC addresses

Ben, Thanks for your tip but our EPO uses MAC address only when GUID gets corrupted.

I have received a reply from CISCO that my problem cannot be solved because there is no workaround for it.

I am still awaiting CISCO statement that this is a well-known issue.

Melita

1321
Views
0
Helpful
4
Replies
CreatePlease login to create content