Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN Client with Certificate and Logging on PIX 6.2

VPN Client with certificate on Token connects through PIX 6.2 to the internal network.

Is it possible to log the Common Name from the certificate on the PIX when the user connects successfull?

1 REPLY
Silver

Re: VPN Client with Certificate and Logging on PIX 6.2

Normally one would think of using something like SNMP though I don't think what you are trying to do is possible. All the same, the documnet 'Using SNMP with the Cisco Secure PIX Firewall' at http://www.cisco.com/warp/public/110/pixsnmp.html describes the process of configuring PIX for SNMP support. You might want to go through it, see the supported MIB's etc and see if there is a roundabout way of doing what you are trying.

164
Views
0
Helpful
1
Replies
CreatePlease to create content