VPN Concentrator - How to assign a different DHCP pool to each group?

[tylerlucas]

I'm using a VPN concentrator and running into some trouble. I would like to be able to assign a different DHCP pool to each group. They can be within the same /24, if necessary, but I need to be able to control which smaller group they are put into. Ideally I would like the following:

GROUP1: 192.168.1.192-223

GROUP2: 192.168.1.224-239

GROUP3: 192.168.1.240-255

Or something to that effect.

I have done the following:

+Selected the "use dhcp" and "use address pools" checkboxes.

+Created two separate DHCP pools (similar to those above)

+Gone in each Group configuration and set "DHCP Network Scope" to the first address in it's respective pool.

For some reason, though, addresses are always given out from a single pool. If I have two users connect, each to a different group, they will both receive addresses from the top pool in the list.

Any insight would be a huge help!

[Farrukh Haroon]

How is your DHCP server configured? Do you have any Super scopes? What platform is it?

Regards

Farrukh

[tylerlucas]

We decided that instead of messing with this we would just use our 3825 router which is closer to the server farm.

Thank you for your help though!