cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
594
Views
0
Helpful
1
Replies

VPN load balance

jeffliu
Level 1
Level 1

1, Configuration

Two VPN concentrator 3000, VPN client 4.0. The concentrators directed connect to Internet and internal LAN.

2, Question

a)Do the two concentrators have to be configured exactly the same (rules, filters) prior to enable load balance cluster? or the secondary one can download configuration from the master?

b)Can virtual ip address in cluster be all 0s?

Thanks in advance!

1 Accepted Solution

Accepted Solutions

spremkumar
Level 9
Level 9

Hi

While enabling the load balancing in your VPN boxes you need to configure them to have identical configruations like as you said the rules on both private and public interfaces as well as the filters on them.

The ip addressing part also needs to be taken care on both the private and public interface also the cluster group ip should be same on both the devices.

also refer this link for more info..

http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094b4a.shtml

regds

View solution in original post

1 Reply 1

spremkumar
Level 9
Level 9

Hi

While enabling the load balancing in your VPN boxes you need to configure them to have identical configruations like as you said the rules on both private and public interfaces as well as the filters on them.

The ip addressing part also needs to be taken care on both the private and public interface also the cluster group ip should be same on both the devices.

also refer this link for more info..

http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094b4a.shtml

regds

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: