I posted recenly because i was unable to connect via VPN i received very helpful replies and that issue is resolved however now that i cann connect via VPN it is painfully slow. something as simple as connecting to a ahre on a server takes forever or sometimes not at all is there anything i can do to speed things up.
i am connecting from cisco VPN client v5.0 to a PIX 501.
I noticed on closer inspection that the stateful firewall on the Cisco VPN client is blocking my attempts to connect to the servers that i have explicitly disabled natting to on the PIX. if i switch the firewall off there is no data in the log so i cannot see what is happening.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...