cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1068
Views
0
Helpful
3
Replies

wan link balance

aviolindo
Level 1
Level 1

its possible to balance several wan links. 2 situation, one if de link belong to the same ISP, 2 if the links belong to several ISP.

My question is, can we do that?

3 Replies 3

afakhan
Level 4
Level 4

Hi,

You sure can do that, just make sure that you terminate your ipsec tunnels on a loopback interface.

Thanks,

Afaq

I am also interested ; I have a main site connected to 10 remote using gre+ipsec; the isp is performing badly, so I want to add a second internet connection to the second serial interface and move some vpn's from "ispA" to the new isp.

Theorically this should be ok, but can you mention working similar design?

thks and rgds

enrico

One way is if you are using BRI, then you can use multilink or bandwidth on demand technology (BOD). you can achieve this by giving

ppp multilink

dialer load-threshold load [outbound | inbound | either]

or if you have any primary link, then you may specify a back up link, saying if the load reaches some threshold, you can enable the second link.

the following site might be of help

http://www.cisco.com/en/US/partner/tech/tk713/tk507/technologies_tech_note09186a0080112d3b.shtml

-Deepu

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: